Link, Images, Projects
| Info |
|---|
Goal of this tutorial
|
...
To apply the forces the Loads & Boundary Condition Tool is needed. By disabling the Thunderbolt (tool execution mode selector) on the top, both Faces of the Non-Design Spaces can be selected simultaneously. Select the cells Faces on the left side.
Three remote loads are created (Force - Moment 1, Force - Moment 2 and Force - Moment 3) on the shown surfaces with the given values in the tables.
Name | Force/Moment/Pressure/Gravity | Direction (depending on local coordinate system) | Value in N/Nmm |
|---|---|---|---|
Force - Moment 1 | Force on cellsfaces | z (proposed center is point of application) | -5000 |
...
Force - Moment 2 is applied on the other two surfaces. The point of application of this remote Force can set up by determing a point regarding the global coordinate system.
Name | Force/Moment/Pressure/Gravity | Direction (depending on local coordinate system) | Value in N/Nmm |
|---|---|---|---|
Force - Moment 2 | Force on cellsfaces | z (Point of Application [-100;0;-15]) | -2000 |
...
Force - Moment 3 is applied on the same surfaces like the first Force. This new Load is reffering to the local coordinate system created earlier.
Name | Force/Moment/Pressure/Gravity | Direction (depending on local coordinate system) | Value in N/Nmm |
|---|---|---|---|
Force - Moment 3 | Force on cellsfaces | x (local coordinate system 1; proposed center is point of application) | 7000 |
...
One Constraint which includes all six Non-Design Spaces is created:
...