Update last picture, upload project
| Info |
|---|
Goal of this tutorial
|
...
Import/create the Design Spaceincluding theNon-Design Spacesin MSC Apex Generative Design 2020 as one solid. For this Jet Engine Bracket the already prepared Design Space was imported.
Create the material in the Materials editor and assign it to the Design Space
The specific values needed are the Young's Modulus (116e3 MPa), Poisson ratio (0.26) and Density (4.48e-6 kg/mm3)
...
Non-Design Spaces have to be selected using the optimisation Tools. In this case the four fixation points and two force application points are selected and a Non-Design Space with an offset of 3 mm is created for each.
...
Machining Allowance Allowances should be applied to every functional surface. Thus, at the end two geometries are created: The Norm-Geometry and the Print-Geometry.
...