Versions Compared

Version Old Version 2 New Version 3
Changes made by

Anne Duechting-Rotsch

Anne Duechting-Rotsch

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Links, Images, Project

Info

Goal of this tutorial

  • Get to know the optimisation model setup for a Restart

  • Get familiar with the Advanced User Settings

  • Influence the Design

  • This function is unsupported in the MSC Apex Generative Design 2020 FP1 Release

...

The Start Space STL-file needs to be entered into the optimisation in the same unit system the model is in!

Start Space STL-file

The Start Space for a Restart must be a STL-file. Therefore, a already optimised geometry can be exported in the Post Processing. In this case iteration 22 from the Bookshelf Tutorial will be used.

...

Attention: The STL-file for the Restart must be exported in SI-Unit system (meters).

Optimisation Setup

In the next step a new Scenario should be created for the Restart optimisation. With the Advanced User Settings - available through a right click on the Scenario - the Start Space STL-file can be selected. In this case the exported iteration 22 is selected.

...