Links
In this section you find information about occurring warnings and errors. As we are still gathering information on how/when warnings and errors occur and under which circumstances this site will constantly be updated with new information.
You can find Warning & Error codes displayed in the Studies tab by double clicking on the Meshless Generative Design Status or in the log files in the result folder in your workspace (log_error.log & log_warning.log).Link
Information regarding the “Analysis Readiness” checks can be found here. Link
Please contact the MSC Apex Support (mscapex.support@mscsoftware.com) if a warning or error occurs which is not yet listed here or cannot be averted by applying the compiled help.
...
This is just a notification that the predicted reduction of the model is very high.
Further information here.
Wf9b42fd9
“Probable reduction of the model is more than …% of the starting model.”
...
If further problems occur, please contact MSC Apex Support.
W1cab408b
The software versions of the engine and the solver do not fit together.
Interne Meldung, für Apex und uns vor einer Release
No connection to the extern solver was possible. The optimization will continue and fall back to local CPU solving.
Please contact MSC Apex Support.
W39fed060
The Matrix is too large for the GPU solver.
...
If you have used the GUI to setup the model, this will be handled automatically.
W7aa7a778
Machining offset " << ident << " is too small to be represented
W74bbc128
Machining offset is much larger than design space. Please check unit dimensions in configuration
W2ab3f0d8
Machining offset protrudes build area box
W61379840
Meshfix warning …
...
Please contact MSC Apex Generative Design support for further help.
W94d7c884
Restart file volume is magnitudes smaller than design space. You might want to check restart file scaling
W1cb255fc
Unable to find file for optimisation space … .
...
Please contact MSC Apex Generative Design Support.
W2ae386d0 - überhaupt beim Kunden?
invalid reconnectionStrategy setting: Expected Default, AllShortestPaths or GreedyShortestPaths
W42f987d5
Restart file found: …
Restarting at iteration …
Restart file found: " << this->restartFile << " - Restarting at iteration "<< this->restartIteration
The optimisation run was interrupted/restarted . The run will continue with iteration … as a starting point.
W1c88afc8
No defined value for the complexity was found in the configuration file.
...
For further questions please contact MSC Apex Support.
We8844d64
Remesh failed
W1cbb4449
There is not enough memory (RAM) available for the optimisation to continue.
...