Update Links, Update Images
After starting an optimization MSC Apex Generative Design automatically switches to the post processing. When an optimization is finished the results of the project can always be visualized inside the post process.
Live View
In the live post processing, the iterations of the optimization are displayed as soon as they are available. The current iteration is shown and the number is displayed at the bottom progress bar. Furthermore, the progress bar shows the planned number of iterations. The Design space can be displayed by selecting the button Initial Shape beneath the progress bar. The optimization can be aborted by selecting the stop button next to the scenario in the left top corner. After finishing or aborting the optimization the post process can be left with the exit button in the right bottom corner.
...
Stresses
The approximated von Mises stress is shown as a colored plot. By default, the maximum stresses of all Events are shown in one plot. Therefore, the stresses from all Events are enveloped and the highest stress for each area is shown. In the right top corner the scale from zero to the maximum of this iteration is displayed. The stresses in the color plot and visualization area are smoothed values of the element representation and therefore estimated values. The goal of generative design is to create a lightweight design which is as close as possible to the elected stress goal.
The stress for each Event separately can be displayed by choosing a specific Event (see picture below).
...
...
Attention: The default scale range is set from the minimum to maximum stress value . Inaccuracies because of FE singularities or stress exceeding because of boundary conditions are included.
By selecting the point chart the stress curve over the iterations can be displayed. These stresses are 95% of the stresses of the element representation. Because of FE inaccuracies we purposely leave out 5% (singularities etc.) and show the relevant values for the engineer to see. Of course 100% of the stresses are being used in the optimization algorithm and this is just for the result overview.
Attention: The maximum stress is displayed here. Inaccuracies because of FE singularities or stress exceeding because of boundary conditions are included.
Wrong stress plot in devel
...
Scale
The scale can be influenced by expanding the scale window with the arrow in the top corner.
It can be chosen between a discrete and a continuous spectrum. The scale can be changed by replacing a number with a distinctly chosen number. The default scale spectrum can set to 2 times the stress goal, which is a good fit for all optimizations. This displays the even distribution of the selected stress goal with the color range of green and critical points are viewable in red. The fixated Nondesign spaces are displayed in blue because no stresses can occur in these areas. At the bottom out of range colors can be activated, which show areas which are above or under the adjusted scale. Moreover, the spectrum can be locked to compare different iterations with the same spectrum.
...
Displacements
By selecting the displacement button the translational displacements are shown. It can be chosen between the resultant or the component for each direction.
...
Mass
By selecting the mass point chart, the mass curve over the iterations is displayed.
Attention: The final mass can change with an intersection!
...
Export Optimization Result
The final optimization results can be exported as an STL-file by selecting the button Export Design Candidate (beneath the progress bar). Because Generative Designs can be very complex, we recommend saving files as Binary-STL.
...
Scale
The scale can be influenced by expanding the scale window with the arrow in the top corner.
It can be chosen between a discrete and a continuous spectrum. The scale can be changed by replacing a number with a distinctly chosen number. Recommended is a scale from zero to double the optimization goal. This displays the even distribution of the selected stress goal with the color range of green and critical points are viewable in red. The fixated Nondesign spaces are displayed in blue because no stresses can occur in these areas. At the bottom out of range colors can be activated, which show areas which are above or under the adjusted scale.
...
Result Files
You can find all result files as well as the different log files of the optimization in your workspace. By default your workspace is defined as:
C:\Users\ExampleUser\Documents\Apex Generative Design Workspace
In this parent folder you can find a seperate folder for each project you have saved. In these you can find your latest optimizations (named after your scenario).
For example: exampleProject/Meshless Generative Design Scenario… .v1