...
Import/create the Design space including the Nondesign spacesin MSC Apex Generative Design 2020 as one solid. For this Bookshelf the already prepared Design space was imported.
Create the material in the Materials editor and assign it to the Design space
The specific values needed are the Young's Modulus (210e3 192372 MPa), poisson ratio (0.3) and density (7.8e97e-6 kg/mm3)
...
Nondesign spaceshave to be selected using the Optimization Tools. In this case the top plate is created as a Nondesign spaces with an offset of 1 mm and the three screw holes are being used with an offset of 3 mm for each.
...