This is a composition from different material data sheets and only suggestions for material properties. MSC Apex Generative Design needs the density, youngs modulus and the poisson ratio as an input.
...
Name | Additive Manufacturing process | Density [kg/m^3] | Youngs modulus [MPa] | Poisson ratio* | Yield strength [MPa] | Tensile strength [MPa] | Source |
|---|---|---|---|---|---|---|---|
PA12 | Selective Laser Sintering (SLS) | 900 | 1700 | 0.39 |
| 45 | EOS Data Sheet |
PP | Selective Laser Sintering (SLS) | 895 | 1200 | 0.43 |
| 27 | EOS Data Sheet |
Alumide | Selective Laser Sintering (SLS) | 1360 | 3800 | 0.4 |
| 48 | EOS Data Sheet |
PLA | Fused Deposition Modeling (FDM) | 1010 | 3039-2539 | 0.43 | 45-26 | 48-26 | Stratasys Data Sheet |
ABS | Fused Deposition Modeling (FDM) | 1050 | 1627 | 0.35 |
| 22 | Materialise Data Sheet |
Ultem 9085 | Fused Deposition Modeling (FDM) | 1340 | 2220 | 0.35 |
| 72 | Materialise Data Sheet |
PA12 | Multi Jet Fusion (MJF) | 1010 | 1700 | 0.38 |
| 48 | Materialise Data Sheet |
EPX82 | Digital Light Synthesis (DLS) | 1155 | 2800 | 0.4 |
| 82 | Carbon Data Sheet |
CE221 | Digital Light Synthesis (DLS) | 1210 | 3870 | 0.42 |
| 92 | Carbon Data Sheet |
...