This is a composition from different material data sheets and only suggestions for material properties. MSC Apex Generative Design needs the density, youngs modulus and the poisson ratio as an input.
...
Name | Additive Manufacturing process | Density [kg/m^3] | Youngs modulus [MPa] | Poisson ratio | Yield strength [MPa] | Tensile strength [MPa] | Source |
|---|---|---|---|---|---|---|---|
PA12 | Selective Laser Sintering (SLS) | 900 | 1700 | 0.39 | 45 | EOS Data Sheet | |
PP | Selective Laser Sintering (SLS) | 895 | 1200 | 0.43 | 27 | EOS Data Sheet | |
Alumide | Selective Laser Sintering (SLS) | 1360 | 3800 | 0.4 | 48 | EOS Data Sheet | |
PLA | Fused Deposition Modeling (FDM) | 1010 | 3039-2539 | 0.43 | 45-26 | 48-26 | Stratasys Data Sheet |
ABS | Fused Deposition Modeling (FDM) | 1050 | 1627 | 0.35 | 22 | Materialise Data Sheet | |
Ultem 9085 | Fused Deposition Modeling (FDM) | 1340 | 2220 | 0.35 | 72 | Materialise Data Sheet | |
PA12 | Multi Jet Fusion (MJF) | 1010 | 1700 | 0.38 | 48 | Materialise Data Sheet | |
EPX82 | Digital Light Synthesis (DLS) | 1155 | 2800 | 0.4 | 82 | Carbon Data Sheet | |
CE221 | Digital Light Synthesis (DLS) | 1210 | 3870 | 0.42 | 92 | Carbon Data Sheet |
...