...
Input Commands | Explanation |
|---|---|
UpSampleConfig fOptimizer_switchAddRemove=58 | Starting with iteration 58, elements are either added or removed and only every second iteration is saved. This is important for the iterations near to the end of the optimization. |
iteration .level_3=20" .level_2=20" .level_1=20" .level_0=10" | Specify how many iterations are calculated at which resolution level. Note that convergence should be achieved at each level. Default settings normalbalanced: 20, 20, 20, 10 Default settings massivesettings sparse: 16, 40, 4, 4 Default settings filigreesettings dense: 10, 10, 40, 10 |
Optimizer_stressPercentGoal .level_3=30 .level_2=40 .level_1=90 .level_0=100 | The percentage at which the target stress is reached is set. Default settings normalbalanced: 30, 40, 90, 100 Default settings massivesettings sparse: 60, 90, 95, 100 Default settings filigreesettings dense: 10, 25, 50, 100 |
The software uses four resolution levels from coarse to fine (level 3: coarse - level 0: fine). More or less resolution levels can be added or removed. The number behind the level indicates the number of iterations calculated on this resolution level. Moreover, the stressPercentGoal for each resolution level can be changed. More information about the stresses and resolution here.
...